Your casting is getting easier!
link
Telephone:0312-7027666
Home >> News >> >>How to Choose a Pneumatic Conveying Device for Particle and Powder Handling

How to Choose a Pneumatic Conveying Device for Particle and Powder Handling

Release Time:2026-11-15

A pneumatic conveying device should match the material, delivery layout, and handling priorities of your process. Our dense-phase medium-pressure system is suited to particles and powders that are not easily broken, with spherical pipeline components, flexible air control, and electronic management for sequential or selective discharge points. Use these checks to judge whether this configuration fits your conveying task.

How to Choose a Pneumatic Conveying Device for Particle and Powder Handling
Illustration for reference; see the product page for actual photos and specifications.
1

Start with the material you need to move

The first check is whether your material is a particle or powder that is not easily broken. Our pneumatic conveying device uses dense-phase medium-pressure conveying for this type of handling. That makes it a suitable choice when the process requires pneumatic movement of particulate or powdery material and material integrity is part of the purchasing decision.

We supply the system for use in foundry, chemical, pharmaceutical, and food industries. The right fit depends on the material and the transfer route, so prepare a clear description of the product you need to move before requesting a configuration. Include whether it is handled as particles, powder, or both, and describe the points where it must enter or leave the line.

2

Match the discharge layout to the control requirement

Choose this device when one conveying system must serve multiple discharge points. Its electronic control system supports sequential or selective conveying, so the arrangement can direct material to different points according to the process requirement.

Sequential discharge suits a process that sends material to several points in an ordered pattern. Selective discharge suits a line where the destination changes between operating cycles. These functions are relevant to foundry, chemical, pharmaceutical, and food production layouts that need more than a single fixed destination.

The purchase decision should include a simple point-to-point layout. Mark the material entry point, every discharge point, and the order or selection logic needed by the process. We can then assess the pipeline arrangement and control requirements against the intended use.

3

Check the pipeline components

The pipeline system includes special wear-resistant spherical elbows, spherical tees, and spherical dischargers. These components should be considered when the route contains changes of direction, branches, or controlled discharge locations.

Spherical elbows are relevant to direction changes in the conveying route. Spherical tees suit branched sections where the line divides. Spherical dischargers support the delivery points. Reviewing these components as a complete system helps you judge whether the proposed line can follow the plant layout and serve its required destinations.

The device also has a complete pipeline system, a flexible air system, and an electronic control system. Together, these are the main configuration areas to review with us: the physical route, the pneumatic arrangement, and the discharge control logic.

4

Consider installation and plant integration

The device is easy to install, which suits projects where the conveying equipment must be added to an existing production arrangement. Installation planning still needs the intended route and discharge layout, because the system is built around the locations it must serve.

We supply the device for industrial use across foundry, chemical, pharmaceutical, and food applications. For a foundry line, describe the particle or powder being transferred and its required destinations. For chemical, pharmaceutical, or food production, describe the material form and the points that need sequential or selective delivery. This gives us the information needed to discuss the suitable pipeline and air-system arrangement.

What to weigh

Material fitparticles and powders that are not easily broken
Layout fitsequential or selective conveying to multiple discharge points
Pipeline fitspherical elbows, tees, and dischargers for the route
Control fitflexible air system and electronic control system
Installation fitcomplete system designed for straightforward installation

Your shortlist

Pneumatic conveying deviceSuitable for foundry, chemical, pharmaceutical, and food applications involving particles or powders that are not easily broken.

Questions to settle before selecting the system

Can this device convey powder as well as particles?

Yes. The pneumatic conveying device is intended for particles and powdery materials that are not easily broken. Tell us whether your process handles particles, powder, or both, so we can relate the conveying arrangement to the material form and the required destinations.

Is it suitable for several discharge points?

Yes. The electronic control system supports sequential or selective conveying to multiple discharge points. Provide the number and location of the required destinations, together with the order or selection pattern, so the pipeline and control arrangement can be reviewed for your process.

Which pipeline parts matter when the route branches?

Spherical tees matter at branch locations, while spherical elbows suit changes in direction and spherical dischargers support delivery points. Share a route drawing showing branches, turns, and discharge locations so we can discuss the complete pipeline system.

Which industries use this conveying device?

The device is used in foundry, chemical, pharmaceutical, and food industries. The application should still match the material requirement: the system is intended for particles and powdery materials that are not easily broken. Include both the industry and material description in your inquiry.

Prepare the right request for your conveying line

Select our pneumatic conveying device when your process moves particles or powdery materials that are not easily broken and needs flexible delivery to multiple discharge points. Its dense-phase medium-pressure method, spherical pipeline components, air system, and electronic control address the main application and layout checks. For a quote, send the material form, route drawing, and discharge-point arrangement.

The company

Yonghong Machinery Group Co., Ltd.

Yonghong has been developing since 1997 and established Yonghong Machinery Group Co., Ltd. in 2020, mainly engaged in the R&D, production, operation, and export of casting equipment. Over more than 20 years of development, Yonghong has always adhered to the business philosophy of “customer satisfaction and win-win cooperation.” The company currently has over 1,200 employees, including 260 professional and technical personnel, accounting for 21.6% of the total.…

About Us ↗Visit company website ↗

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.